Product Overview
The Newstart Lighting LED COB Face Light is engineered for commercial luminaire manufacturers and architectural lighting specifiers seeking a seamless, dot-free linear light source. Built on high-conductivity extruded aluminum substrates with integrated flip-chip COB arrays and uniform silicone phosphor compounding, this module emits a uniform surface illumination across wide beam angles (120 deg to 160 deg).
Designed for direct integration into architectural aluminum profiles, pendant housings, and display showcases, each production batch undergoes strict chromaticity sorting to eliminate visible color variance across multi-meter continuous runs.
-
400W Moving Head COB Face LightModel:NST-400MBrand:New StartCountry of origin:China400W Moving Head COB Face Light is a high-performance headlight device designed for professional Settings such as stage performances, theaters, TV
-
200W COB LightModel:NST-H200Brand:New StartCountry of origin:China200W COB Light is a cost-effective professional stage lighting equipment for fill lighting in small and medium-sized performances, theaters,
-
Four Eyes LED Surface COB LightModel:NST-L200Brand:New StartCountry of origin:ChinaFour Eyes LED Surface COB Light is a cost-effective professional stage lighting equipment for fill lighting in small and medium-sized performances,
-
LED 200W Surface Warm Zoom LightModel:NST-H200Brand:New StartCountry of origin:ChinaLED 200W Surface Warm Zoom Light is a adjustable range and precise aperture control ability, suitable for stage spotlight, close-ups emphasize its
-
LED 200W Studio Fresnel LightModel:NST-MT200Brand:New StartCountry of origin:ChinaLED 200W Studio Fresnel Light is a professional lighting fixture that focuses on high-brightness and precise light control. Its core advantages
-
LED 150W COB Surface LightModel:NST-M150Brand:New StartCountry of origin:ChinaLED 150W COB Surface Light illuminates larger areas or highlights specific objects. Suitable for stages, close-ups of people to emphasize it in
-
LED 60W Mini COB Stage LightModel:NST-X60Brand:New StartCountry of origin:ChinaLED 60W Mini COB Stage Light is a professional lighting fixture that emphasizes compact portability and soft fill light. Its core advantages focus
-
LED 2x60W Two Eyes Mini COB Surface LightModel:NST-X24Brand:New StartCountry of origin:ChinaLED 2x60W Two Eyes Mini COB Surface Light is a professional lighting fixture that features a compact body and dual light heads for strong fill
-
LED 150W Studio Soft Panel Conference LightModel:NST-256KBrand:New StartCountry of origin:ChinaLED 150W Studio Soft Panel Conference Light is a professional lighting fixture designed for meeting scenarios. Its core advantages focus on high
-
LED 200W Studio Soft Panel Conference LightModel:NST-432KBrand:New StartCountry of origin:ChinaLED 200W Studio Soft Panel Conference Light is a high color rendering LED flat panel soft light designed for high-quality image lighting and
-
LED 200W Studio Leko Profile LightModel:NST-C200Brand:New StartCountry of origin:ChinaLED 200W Studio Leko Profile Light is a precisely shaped lighting fixture designed for professional Settings such as theaters, television stations,
-
LED 300W Studio Leko Profile LightModel:NST-C300Brand:New StartCountry of origin:ChinaLED 300W Studio Leko Profile Light is a professional imaging fixture designed for high-end film, television, stage and theater lighting. It uses a
Key Features
Strict MacAdam Binning
Controlled within 3-step MacAdam ellipses to guarantee color matching across large-scale commercial installation phases.
Reliable Electrical Interconnects
Pre-soldered UL-certified silicone lead wires (20 AWG) with polarity markings ensure low-resistance, foolproof assembly.
Zero-Pixelation Uniformity
Dense multi-die flip-chip architecture combined with precision phosphor layers eliminates visible diode dots, even inside shallow extrusion profiles (less than or equal to 10 mm depth).
Optimized Thermal Architecture
Built on a 1.5 mm aluminum PCB (2.0 W/m*K thermal conductivity) with a direct-contact thermal pad, maintaining operating junction temperature (Tj) below 75 deg C at rated load.
Technical Specifications
|
Parameter |
Specification Standard |
Test Condition / Note |
|
Input Voltage (Vf) |
DC 24V / DC 36V / Custom Constant Current |
Constant Voltage or Constant Current Driver |
|
Power Consumption |
10W/m to 24W/m (Customizable) |
plus or minus 5 percent tolerance at 25 deg C ambient |
|
Color Rendering Index (CRI) |
Ra greater than or equal to 90 (Optional Ra greater than or equal to 95, TM-30 Rf greater than or equal to 90, Rg greater than or equal to 98) |
Integrating sphere tested |
|
Color Temperature (CCT) |
2700K, 3000K, 4000K, 5000K |
Custom CCT available on request |
|
Luminous Efficacy |
110 lm/W to 130 lm/W |
Dependent on CCT and CRI configuration |
|
Beam Angle |
120 deg (Surface Lambertian distribution) |
Measured at 50 percent max intensity |
|
Operating Temperature |
-25 deg C to plus 55 deg C |
Ambient working range |
|
Lifespan (L80B50) |
Greater than 50,000 Hours |
Tested per LM-80 / TM-21 extrapolation guidelines |
|
Ingress Protection (IP) |
IP20 (Standard) / IP65 (Silicone extrusion coated) |
Custom waterproof options available |
|
Standard Dimensions |
Width: 8mm / 10mm / 12mm; Length: 500mm |
Custom cutting increments supported |
Installation & Configuration Guidelines

Mechanical Mounting
Surface Preparation: Degrease and clean the target aluminum extrusion channel using isopropyl alcohol.
Thermal Interface: Apply 3M 8810 thermal conductive tape or non-silicone thermal grease behind the baseplate to maintain thermal transfer resistance less than 0.5 K*in^2/W.
Physical Protection: Secure via edge fixing clips; avoid applying direct mechanical torque directly over active phosphor surfaces.
Electrical Wiring
Polarity Check: Connect red wires to positive (+) and black wires to negative (-) terminals of a Class 2 constant voltage DC driver.
Voltage Drop Mitigation: For continuous runs exceeding 5 meters, inject power from both ends or utilize parallel power feeds every 3 meters.
Soldering Parameters: Keep iron tip temperature at 350 deg C plus or minus 10 deg C with contact time under 3 seconds to protect substrate traces.

Typical Applications
Architectural Linear Profiles
Recessed, surface, or suspended aluminum channels for office and hospitality lighting.
Retail Displays & Millwork
Narrow-profile showcase lighting requiring reflection-free, dotless illumination on glass and metal surfaces.
Museum & Gallery Showcases
High-CRI (Ra greater than or equal to 95) cabinets requiring strict control over thermal output and color accuracy.
Customization & OEM/ODM Capabilities
As a direct manufacturing partner with in-house SMT and optical laboratories, Newstart Lighting supports flexible engineering customization:
PCB Dimensions
Custom widths (6mm to 20mm) and specific lengths tailored to proprietary fixture designs.
Electrical Tuning
Tailored forward voltages, customized wattage densities, and integration with DALI, 0-10V, or PWM protocols.
Laser Marking
Custom PCB printing featuring client logos, serial numbers, and polarity indicators.
Quality Control Protocols
Incoming Chip Sorting: Automated probing machines sort LED chips by precise wavelength and voltage bins.
SMT & Reflow Control: Real-time thermal profile tracking during surface-mount soldering to eliminate micro-cracks.
Automated Optical Inspection (AOI): High-resolution scanning for component alignment and phosphor integrity.
Burn-in Aging Test: 100 percent burn-in under elevated current for 4 hours at 45 deg C ambient.
Spectrophotometric Verification: Final integrating sphere audit recording exact flux, CCT, and CRI for every batch.

Technical Documentation & Support
Photometric Files
Downloadable IES / LDT files for DIALux simulation.
Compliance Data
LM-80 / TM-21 reports and third-party test documentation.
Engineering Assistance
Direct collaboration with our optical and electronic engineering team for custom prototyping.
Frequently Asked Questions

Request a Quote
Discuss your custom fixture requirements, request IES files, or order evaluation samples with our engineering sales team:
Corporate Website: newstartkate@gmail.com
Direct Engineering Inquiries: info@newstartkate@gmail.com
Guangdong New Start Lighting Co., Ltd. is one of the most professional led cob face light manufacturers and suppliers in China. Welcome to wholesale durable led cob face light in stock here and get quotation from our factory. All customized products are with high quality and competitive price.